See Pricing Information or Place an Order
Package sizes include:
|
Order Size |
Product Code |
|
1.5-oz Pillow Pack |
ATP-PK |
|
1.5-oz. Pillow Packs (case of 48) |
ATP-48 |
|
3.5-oz. Bottle |
ATP-BA |
|
3.5-oz. Bottles (case of 12) |
ATP-35 |
|
8-oz. Bottle |
ATP-BC |
|
8-oz. Bottles (case of 12) |
ATP-08 |
|
1-Quart Bottle |
ATP-QT |
|
1-Quart Bottles (case of 12) |
ATP-01 |
|
30-Gallon Drum |
ATP-30 |
|
55-Gallon Drum |
ATP-55 |
| Amsoil 2 cycle Oil Lineup AIT Applications "The Fabulous Four" |
HP Injector Synthetic 2-Cycle Oil
(HPI) Saber Professional Synthetic 100:1 Pre-Mix 2-Cycle Oil (ATP) Saber Outboard Synthetic 100:1 Pre-Mix 2-Cycle Oil (ATO) INTERCEPTOR Synthetic 2-Cycle Oil (AIT) DOMINATOR Synthetic 2-Cycle Racing Oil (TDR) |
AMSOIL Saber Professional (ATP) Synthetic 2-Cycle Oil is specifically designed for lean mix ratios in pre-mix applications. Saber Professional contains high temperature detergents for small power equipment. Extensive testing shows superior lubricity and cleanliness properties at lean mix ratios of this premium synthetic formulation.
Product Description
AMSOIL Saber
Professional (ATP)
Synthetic 100:1 Pre-Mix
2-Cycle Oil is
formulated with
exclusive AMSOIL
synthetic base oils and
premium additives.
Designed for lean mix
ratios in two-cycle
motors, Saber
Professional 2-Cycle Oil
has excellent lubricity
and cleanliness
properties that control
friction, wear, plug
fouling, ring sticking
and exhaust port
blocking. AMSOIL
Synthetic 100:1 2-Cycle
Oils have been
protecting and providing
improved performance in
two-cycle motors since
1973.
Saber Professional
Saber Professional (ATP)
is specifically designed
for small engines
including, but not
limited to, chain saws,
lawn equipment, blowers,
chop saws, pumps,
scooters and go-carts.
It is also very good for
use in motorcycles,
snowmobiles, ATVs, jet
boats and personal
watercraft. Saber
Professional is
formulated with high
temperature detergent
additives that limit
hard carbon deposit
formations in hot
operating motors. Saber
Professional is
“smokeless” and delivers
lower emissions at 100:1
mix ratios than oils
mixed at 50:1. Equipment
operators subjected to
smoke and fumes will
benefit from these low
emission properties.
Because one mix ratio
satisfies multiple
pieces of equipment,
Saber Professional
eliminates mix ratio
confusion. Saber
Professional is
recommended for pre-mix
where ISO-L-EGD, JASO FC
or API TC is specified.
Applications (see
Two-Cycle
Recommendations Chart)
AMSOIL Saber 100:1
2-Cycle Oil is
recommended for 100:1
mix ratios in normal
service. Richer mix
ratios may be used where
desired.
|
TYPICAL
TECHNICAL
PROPERTIES Saber Professional Synthetic 100:1 Pre-Mix 2-Cycle Oil (ATP) |
|
|
Kinematic Viscosity @ 100°C, cSt (ASTM D-445) |
13.5 |
|
Kinematic Viscosity @ 40°C, cSt (ASTM D-445) |
99 |
| Viscosity Index (ASTM D-2270) | 136 |
|
Pour Point °C (°F) (ASTM D 97) |
-38 (-36) |
|
Flash Point °C (°F) (ASTM D 92) |
114 (237) |
| Fire Point °C (°F) (ASTM D 92) | 114 (237) |
| DANGER: harmful or fatal if swallowed. Contains synthetic lubricant and petroleum distillates. If swallowed do not induce vomiting. Contact a physician immediately. Keep away from fire, heat and open flame. Use with adequate ventilation. Avoid frequent or prolonged skin contact. Flush eyes with water for 15 minutes in case of contact. KEEP OUT OF REACH OF CHILDREN | |
|
Receive Important Amsoil Product and Dealership Information via Email (Find out how to get special money saving discounts on Amsoil products too!) |
|
Email addresses are Never given or sold to third parties We Hate Spam, we know you do too! |