See Pricing Information or Place an Order
|
Package sizes include: |
Product Code |
|
5-Gallon Pail |
CTLO5 |
|
55-Gallon Drum |
CTL55 |
(Also see SAE 10W
and SAE 30 Powershift
Transmission Fluid)
PRODUCT DESCRIPTION
AMSOIL Synthetic Powershift Transmission Fluids are specifically designed for
high-torque heavy-duty powershift transmissions. Formulated for extended drain
intervals, Powershift Transmission Fluids contain top-quality synthetic base
stocks and a high level of top-quality additives selected specifically for
powershift transmissions. They offer unmatched transmission friction
performance, smooth brake operation, reduced gear and bearing wear and increased
equipment life.
Friction Characteristics
AMSOIL Synthetic Powershift Transmission Fluids are compatible with common
metallic and nonmetallic friction materials. Their stable frictional
characteristics eliminate excessive brake noise and vibration. Their nonslip
friction durability virtually eliminates clutch slippage, which can cause
glazing or friction surface deposits and material degradation. Powershift
Transmission Fluids are formulated to deliver responsive yet smooth clutch
engagements, excellent power transmission through clutches and synchronizers and
superior hydraulic fluid performance for servo-equipped units.
Wear Protection
AMSOIL Synthetic Powershift Transmission Fluids exceed the wear requirements of
the Caterpillar TO-4 specification and are formulated without viscosity index
improvers for superior shear stability. The superior shear stability of
Powershift Transmission Fluids allows them to maintain grade throughout service
life, providing long-term protection against equipment wear, even when equipment
is frequently subjected to sustained periods of applied pressure or high
horsepower and high torque.
High and Low Temperature Performance
In high temperatures, AMSOIL Synthetic Powershift Transmission Fluids
effectively protect components from wear. Their superior oxidative and thermal
stability inhibits the formation of varnish, deposits and sludge so equipment
runs clean. Synthetic Powershift Transmission Fluids are excellent heat transfer
fluids and may help hot-running equipment operate cooler and run in its optimal
temperature range. In low temperatures, Synthetic Powershift Transmission Fluids
flow readily for dependable startup and post-startup protection.
Copper Corrosion, Rust and Foam Inhibition
AMSOIL Synthetic Powershift Transmission Fluids protect equipment from copper
corrosion and rust, even during equipment storage. Synthetic Powershift
Transmission Fluids do not foam in service, protecting equipment from the
metal-to-metal contact and wear that occurs with use of foam-filled fluids.
Performance Data
AMSOIL SAE 50 (CTL) Synthetic Powershift Transmission Fluid is Recommended for
Applications Requiring the Following Specifications:
Caterpillar TO-4
Twin Disc
Komatsu T-50
Allison C-4
Rockwell/Eaton/Fuller CD-50 (PS-081)
ZF TE-ML 01
API GL-1
Applications
Dozers
Semi-trucks manual transmissions
Wheel loaders and crawlers
Back hoe loaders
Cranes
Off-road fork trucks
Harbor handling equipment
Railway equipment
Mining equipment
Road graders
Commercial boats
AMSOIL Synthetic SAE 50 Powershift Transmission Fluid is formulated for Fuller
CD-50 performance and is ideal for use in Rockwell/Eaton/Fuller, Spicer, Fabco,
Warner and other large truck manual transmissions.
AMSOIL Synthetic SAE 50 Powershift Transmission Fluids can be used in
Caterpillar, Allison, Komatsu, Clark, Hurth, Borg-Warner, Twin Disc, Voith, ZF,
Funk and Brockhouse powershift-type transmissions and Eaton/Rockwell/Fuller
transmissions.
Installation
AMSOIL Synthetic Powershift Transmission Fluids are fully compatible with other
TO-4 fluids used in powershift applications. To install AMSOIL Synthetic
Powershift Transmission Fluids, drain the fluid in the system, replace the
filter (if so equipped) and install the appropriate Powershift Transmission
Fluid.
Service Life
AMSOIL Synthetic Powershift Transmission Fluids provide extended service life
beyond conventional petroleum fluids if Synthetic Powershift Transmission Fluids
are kept free of dirt and moisture. Oil analysis is recommended if extending
service intervals beyond equipment manufacturer recommendations.
AMSOIL Synthetic Powershift Transmission Fluids may be used for 250,000 miles or
two years (whichever comes first) in CD-50 manual transmission applications.
AMSOIL Limited Warranty
| Typical Technical Properties AMSOIL SAE 50 Synthetic Powershift Transmission Fluid (CTL) |
|
| SAE Viscosity Grade | 50 |
| ISO Viscosity Grade | 150 |
| Kinematic Viscosity @ 100° C, cSt (ASTM D-445) | 18.3 |
| Kinematic Viscosity @ 40° C, cSt (ASTM D-445) | 159.0 |
| Viscosity Index (ASTM D-2270) | 128 |
| Flash Point °C (°F) (ASTM D-92) | 268 (514) |
| Fire Point °C (°F) (ASTM D-92) | 292 (558) |
| Pour Point °C (°F) (ASTM D-97) | -36 (-33) |
| Four Ball Wear Test 40 kg. 75°C, 1200 rpm, 1 hour (ASTM D-4172 B) | 0.35 |
| Noack 250°C, 1 hour, percent weight loss (DIN 51581) | 3.5 |
| (Also see SAE 10W and SAE 30 Powershift Transmission Fluid) | |