See Pricing Information or Place an Order
Package sizes include:
|
Order Size |
Product Code |
|
8-oz. Bottle |
ATO-BC |
|
8-oz. Bottles (case of 12) |
ATO-08 |
|
1-Quart Bottle |
ATO-QT |
|
1-Quart Bottles (case of 12) |
ATO-01 |
|
30-Gallon Drum |
ATO-30 |
|
55-Gallon Drum |
ATO-55 |
|
Amsoil 2 cycle Oil Lineup AIT Applications |
HP Injector Synthetic 2-Cycle Oil
(HPI) Saber Professional Synthetic 100:1 Pre-Mix 2-Cycle Oil (ATP) Saber Outboard Synthetic 100:1 Pre-Mix 2-Cycle Oil (ATO) INTERCEPTOR Synthetic 2-Cycle Oil (AIT) DOMINATOR Synthetic 2-Cycle Racing Oil (TDR) |
Product Description
AMSOIL Saber Outboard (ATO)
Synthetic 100:1 Pre-Mix
2-Cycle Oil is
formulated with
exclusive AMSOIL
synthetic base oils and
premium additives.
Designed for lean mix
ratios in two-cycle
outboard motors, Saber
Oil has excellent
lubricity and
cleanliness properties
that control friction,
wear, plug fouling, ring
sticking and exhaust
port blocking. AMSOIL
Synthetic 100:1 2-Cycle
Oil has been protecting
and providing improved
performance in two-cycle
motors since 1973.
Saber Outboard
Saber Outboard (ATO) is
specifically designed
for outboard motors. It
is also very good for
personal watercraft, jet
boats, motorcycles,
snowmobiles and ATVs.
Saber Outboard contains
a heavy dose of lower
temperature dispersant
additives that excel at
preventing varnish and
deposits from forming in
water-cooled motors.
Saber Outboard is a very
low smoke, low odor, low
toxicity product that
produces lower emissions
at 100:1 mix ratios than
oils mixed at 50:1. It
is ideal for trolling
motors as lean mix
ratios reduce “oil
loading” and plug
fouling for rapid
throttle response.
Operators and the
environment benefit from
the use of Saber
Outboard. It is
recommended for pre-mix
use where TC-W3 or API
TC is specified.
Applications (see
Two-Cycle
Recommendations Chart)
AMSOIL Saber 100:1
2-Cycle Oil is
recommended for 100:1
mix ratios in normal
service. Richer mix
ratios may be used where
desired.
|
TYPICAL
TECHNICAL
PROPERTIES |
|
|
Kinematic Viscosity @ 100°C, cSt (ASTM D-445) |
17.9 |
|
Kinematic Viscosity @ 40°C, cSt (ASTM D-445) |
141.2 |
| Viscosity Index (ASTM D-2270) | 141 |
|
Pour Point °C (°F) (ASTM D 97) |
-33 (-27) |
|
Flash Point °C (°F) (ASTM D 92) |
120 (248) |
| Fire Point °C (°F) (ASTM D 92) | 138 (280) |
| DANGER: harmful or fatal if swallowed. Contains synthetic lubricant and petroleum distillates. If swallowed do not induce vomiting. Contact a physician immediately. Keep away from fire, heat and open flame. Use with adequate ventilation. Avoid frequent or prolonged skin contact. Flush eyes with water for 15 minutes in case of contact. KEEP OUT OF REACH OF CHILDREN. | |